登錄后自動綁定微信號
Hikvision Smart Factory Workshop Staffing Control High Security Level Security System
This intelligent software and hardware system interfaces with several types of hardware such as Hikvision‘s swing gates, license plate recognition cameras, facial recognition access control, vehicle entry and exit gates, network relays, and network sound columns. Integrate with the management backend to deeply manage the entry and exit of vehicles and personnel.
Register the vehicles with their respective departments and set the allowed entry and exit time periods. In addition to license plate recognition and time period calculation, set the monthly cumulative entry and exit frequency, daily entry and exit frequency, and monthly entry and exit frequency for the vehicles in the department.
If the vehicle is used up beyond the prescribed limit of entry times on the same day, the vehicle is not allowed to enter.
Each vehicle is bound to one or more drivers, and when the vehicle enters and exits, in addition to license plate recognition, entry and exit time period calculation, and entry and exit frequency calculation. When the vehicle enters the front of the barrier gate, the driver needs to roll down the window and face the camera. The system automatically verifies the driver and the vehicle, and only active drivers and vehicles with entry and exit quotas can enter.
Whether the vehicle and driver successfully enter or not, they are synchronously reflected on the computer/PAD/mobile phone of the management end and display end.
When encountering special reasons, you can apply to the administrator for temporary access to the barrier gate. After the administrator enters the reason on the computer/PAD/mobile phone, the system allows the vehicle to enter.
Like vehicles, personnel from different departments and units are granted access permissions for different time periods based on their job positions. For example, workers can only enter and exit once a day, and in special circumstances, they should contact the security administrator for authorization to enter and exit.
When personnel arrive at the gate of the swing gate, they will perform facial or iris recognition with the facial recognition access control, and the system will authorize the swing gate to open for personnel to enter and exit. For personnel who leave through the escape route, the management system will always display that the person has not left. The system will push an alarm to the security management team. After the security administrator confirms on site, they will reply to the system about the incident and simultaneously contact the alarm.
Once an emergency situation occurs, the security team administrator will activate an emergency notification, and the on-site network speakers will issue a voice notification for emergency evacuation. At the same time, the flashing alarm light will continue to flash, using sound and light to notify on-site office personnel to evacuate as soon as possible. During emergency evacuation, play the evacuation route map on the large screen at the scene. After the safety is revoked, the evacuation is completed, and the on-site alarm sound and light alarm are turned off.
Function List:
Backend configuration:
Personnel quota setting.
Vehicle staffing settings.
Departmental configuration.
Vehicle configuration.
Driver configuration.
Personnel configuration.
License plate recognition camera configuration.
Access control configuration.
Barrier gate configuration.
Network sound column configuration.
Swing gate configuration.
Front end business logic:
Vehicle entry and exit:
Authorize vehicles to enter and exit.
When authorized vehicles enter and exit, the gate will no longer be opened when the configured number of vehicles is fully parked.
Administrators can manually intervene in opening and closing the barrier gate.
On site appointment, fill in the license plate, entry and exit time period, and reason. The mini program will push it to internal personnel to confirm authorization.
Take photos and archive them when vehicles enter and exit.
Personnel entry and exit:
Authorized personnel conduct remote verification through on-site facial recognition.
At this time, based on the current number of personnel, compare the upper limit of the configured personnel. When it is not fully staffed, open the gate to enter.
If full, entry is not allowed.
Administrators can manually intervene in the opening and closing of the switch.
On site appointment, taking photos and filling in the entry and exit time period and reason, the mini program pushes to internal personnel to confirm authorization.
The system is divided into a display end and an operation end. There is no quantity limit for adding the display end, and there is no quantity limit for adding the operation end.
Simultaneously supporting display and operation on PAD, mobile phone, and computer.
Statistics of Large Screen Landing:
On duty personnel statistics.
Statistics of incoming and outgoing vehicles.
Statistics on overcrowding of incoming and outgoing personnel.
Statistics of remaining vehicle usage.
Temporary personnel statistics.
Alarm event statistics.
Statistics of escape incidents.
Statistics of security administrator authorization events.
Tel: (086) 199 0808 0851.
漢中市洋縣公車自動派單APP小程序源碼 文鋒科技一直都以“能解決傳統的用車、派車、突發事故處理、結算、對賬以及員工管理和司機、車輛管理上的約束,提高響應的效率、擴大司機及車輛的數量范圍,精細化和準確化車輛租賃使用時間和里程賬單等數據”作為漢中市洋縣公車自動派單APP小程序的開發目標,經過兩年的打磨,已經為多家企業提供穩定順暢的公車自動派單APP小程序。 更多更具體更詳細的功能請見漢中市洋縣公車自動派單APP小程序的功能清單。 【漢中市洋縣公車自動派單APP小程序功能清單】 1、現有車輛集中管理。 車輛今年出車人次、乘客資料,出發點及目的地,行駛里程,駕駛車型及司機資料,加油量,養護次數,行駛車速是否超速,是否W章等數據均可查、可看、可統計、可導出。 用車人申請用車時,車隊隊長在手機APP里可查看該車輛是否可調度。 2、引入社會帶司機車輛資源。 3、引入社會無司機車輛資源。 4、司機集中管理。 5、車輛、司機排班管理。 6、線上申請、審批流-程數據化。 7、車輛養護集中管理。 8、強大預算定制管理。 9、精細化管理。 10、報表統計管理。 11、統計查詢、統計結果導出EXCEL。 12、每年年終用車超標部門核查。 【漢中市洋縣公車自動派單APP小程序用車人APP介紹】 用戶注冊、個人中心、申請用車、車輛選擇、我申請的所有訂單、信息中心、修改所在部門、二維馬掃描、遠程啟停車輛、遠程鎖車。 個人中心包括修改手機-號、修改頭像、修改所在部門。
代駕APP代駕軟件代駕源碼網約車許可證辦理代駕小程序 18、(代駕APP代駕軟件代駕源碼網約車許可證辦理代駕小程序)乘客可以選擇多種支付方式,包括在線支付、現金結算、二維MA支付、余額支付、優惠券抵扣等5種支付方式;使用哪種支付方式取決于司機推送賬單時的選擇; 19、如果是現金支付和二維MA支付,不論成功與否,(代駕APP代駕軟件代駕源碼網約車許可證辦理代駕小程序)乘客端均不會顯示支付界面,直接顯示評價對方的界面; 20、如果此次費用未支付,乘客下次使用該APP時,(代駕APP代駕軟件代駕源碼網約車許可證辦理代駕小程序)APP會自動彈出提醒上次訂單未支付,需要支付完成后才可以繼續下單;
商洛市網約車打車軟件急網約車牌照轉讓 贈送網約車打車軟件一套,包括安卓版APP乘客端、安卓版APP司機端、PHP管理員端;具體功能如下: 【網約車乘客端功能介紹】 一、電話下單、一鍵下單、語音下單、選擇目的地下單、替人下單、預約下單,叫網約車。 二、優惠券發放與使用。 三、線下付費、優惠券抵扣費、充值余額付費、積分抵扣付費、線上付費。 四、分享邀請好友使用;邀請好友使用返利。 五、訂單模塊管理:訂單取消、訂單評價、訂單投訴。 六、下單前可見附近空閑網約車。 七、下單后可見通知網約車司機數量,嗆單司機數量、拒絕司機數量。 八、下單后3分鐘內重復呼叫網約車司機次數。 九、網約車司機接單后可以看到司機的工號、接單次數、服務分、評價分、電H。 十、網約車司機起身來出發地時,可以看到網約車的所在位置和行車路徑。
大連綠色新能源公務用車排班調度解決方案APP 文鋒公務用車派車系統包含了用車人端,審核員端,調度員端,司機端,總部管理員后臺等五大終端。每個終端又分為小程序版、安卓版。 不論是用車人還是司機或調度員,每一個使用習慣與細節在文鋒公務用車派車軟件均有體現與兼顧。 綠色新能源公務用車排班調度APP功能模塊如下: 1、用車人申請車功能模塊;為申請人提供更舒服的用車申請,不限制申請人的申請時間、申請地點,方便申請人。 2、用車人領導審批申請功能模塊;為用車人的領導提供更友好,更省心,更方便的審批方式。
寶雞市麟游縣自駕房車租賃小程序選車租車導航線上結算APP 如果您正在尋找一套可查看車輛的剩余電量和剩余可行駛里程、顯示附近充電站、能遠程啟動或停止車輛、掃馬開門、異地更換電池等功能的自駕房車租賃小程序選車租車導航線上結算APP。 那找到我們算問對路了,文鋒科技自打研發該系統并投入市場后,在自駕房車租賃小程序選車租車導航線上結算APP市場里,受到不少甲方企業的歡迎和好評。相信他們的使用與迭代更新所走過的彎路能為新的使用該軟件企業節省不少寶貴時間。經過三年時間的打磨和修改完善以后,目前具備300來個穩定、成熟的功能,涵蓋七個不同的角色,十四個不同的終端。 代碼可以買斷,可以購買授權,可以按年租,可以按月租。 不輪任何一種合作方式,甲方提供第三方接口后,三天內就能投入生產環境的正式運營。 更多更具體更詳細的功能請見寶雞市麟游縣自駕房車租賃小程序選車租車導航線上結算APP的功能清單。